DURA Original Anti-fracture Mat
Order within and select Express Delivery
DURA Original Matting is an anti-fracture membrane that eliminates the risk of tiles cracking or becoming loose when installed upon a substrate which may be subject to lateral movement such as expansion or contraction, e.g. chipboard floors. It will also act as a decoupling membrane on substrates which are aged and exhibiting signs of movement such as cracked screeds by isolating the tiled surface from the foundation below. DURA Original can also be installed in wet rooms, steam rooms and bathrooms as a waterproof barrier when used in conjunction with the Durabase tape, providing a waterproof layer ensuring that any water sensitive substrates remain unaffected and the tile installation remains secure.
DURA Original is supplied by the 30m² Roll or by the M² in M² Increments, simply select the format you wish to purchase it in below and the quantity you wish to buy.
DURA Original Installation Guide
- If necessary, apply a suitable primer onto the surface where DURA Original is to be used
- Cut the DURA Original mats to the required size
- Use Ultimate flexible S2 adhesive using a trowel with the notches of approximately 4mm (0.16inch) in width. Apply the adhesive evenly to the surface
- Lay the DURA Original mats reverse side down (White fleece at the bottom) onto the fresh adhesive and press them down evenly with the flat side of the trowel.
- Use Durabase sealing tape to cover the junctions between mats
- Completley cover the top of the mats with flexible adhesive, then roughen the adhesive surface using a suitably sized notched trowel (the trowel size depends on the size of the tiles), then lay the tiles on top
- Grout the tiles using flexible or ordinary grout
| SKU | 4018448063811 |
|---|---|
| Product Instructions | Durabase CI++ Sheet |
| Adhesive | S2 Class Adhesive to be used to fix Durabase to substrate |
| Depth | 3.5mm |
| Suitable for | Floors |
| Use | Decoupling and sealing mat for use under ceramic , porcelain and natural stone tiles. |
| Width | 1m |
| Chemical Stability | Resistant to diluted acids, alkalie and salt solutions |
| Disposal | Non-hazardous, e.g disposable along with normal domestic waste |
| Electrical Properties | High electrical resistivity |
| Behaviour in Instance of Fire | Normal flammability (B2 as per DIN 4102, Part 1) |
| Lower Material | Polypropylene (PP) |
| Permitted Temperature Range | -40° to +80°C |
| Tensile Strength | 580 N/5m² |
| Linear Thermal Expansion Coefficient | 175 x 10-⁶ |
| Transport Restrictions | Non-hazardous as per GGVSE?ADR and GGSV see/IMDG |
| Upper Material | Polypropylene (PP) |
| Waterproof | 100% Waterproof (When used in conjunction wit the Durabase joint tape) |
| Weight | 0.615 per M² |
