Tough, Safe, Long Lasting Heating Element
Modern WiFi Thermostat
Interactive & Intelligent
The use of insulation boards will reduce heat up times and running costs by up to 50%. This means they can pay for themselves in just 2-3 years.
This heating is suitable for installation onto timber floors which have been over boarded with a minimum of 15mm exterior or marine quality ply.
Stable timber floorboards or 22mm chipboard flooring which have not been over boarded will require installation boards installed to provide a thermal barrier between the heating cable and the timber.
Heating Cable Size Selection
Before selecting your heating it is vital to ensure you have the correct size heating cable to suit your room. This is critical as the heating element CANNOT be reduced or extended.
Always round DOWN to the nearest size. It is always best to have a little less heating than some left over!
Full installation instructions can be found in the data sheets section below
If you need any further advice please call us on 01473 805959 or drop us an email at [email protected]
|Suitable for use under||Tiles - Ceramic, Porcelain & Natural Stone|
|Wattage Output||150w / m²|
|Heat Mat Guarantee||25 Years|
|Element Structure||Dual Core Wire|
|Cold Tail Length||3m|
|Earth Type||100% Coverage Earth Shield|
|Power Supply||AC230V +/-10% 50/60Hz|
|Total Output||See Instructions Below For Individual Sizes|
|Current Load||See Instructions Below For Individual Sizes|
|Resistance Value||See Instructions Below For Individual Sizes|
|Heat Mat Dimensions||See Instructions Below For Individual Sizes|
|Product Instructions||BodenWarme Underfloor Heating Instruction Manual Loose Cable|
This featured is only available on our Tile pages. As it takes into account the dimensions of the Tile you are viewing.