Mega Strength adhesive is a game-changer for installing the NoMorePly boarding range. With a rapid 5-minute set time and a water-free formula, it avoids excessive foaming while expanding to fill any small gaps beneath the boards. Plus, it’s 100% waterproof, making it the perfect jointing solution for bathrooms, wetrooms, and any moisture-prone area.
Designed to work seamlessly with the 6mm PrePrimed fibre cement boards, 12mm fibre cement boards, and TG4 fibre cement boards, this adhesive is an essential component of the NoMorePly system. It guarantees maximum performance and longevity, making it the go-to choice for professional installers looking for reliability and efficiency
Guide to using Mega Strength adhesive
Always wear gloves when handling Mega Strength adhesive
Ensure that the area is free from contaminants such as dust, grease and dirt
One of the surfaces must be porous, if required roughen the second surface to provide a better key for adhesion.
Remove the nozzle, cut to 45°, cut open the end of the tube and replace nozzle.
Apply evenly to surface and clamp together, full bond strength will be achieved after 30mins
When using Mega Strength adhesive to seal between No More Ply boards the adhesive will expand and foasm slightly, this is due to the nature of Pu adhesive. Excess adhesive should be removed with acetone. If the adhesive has set it can be removed with a sharp chissel
If you have any questions regarding No More Ply please call our technical team on 01473 805959