High density extruded polystyrene core with fiberglass mesh reinforced cement polymer on both sides.
Number of Boards Required
Full installation instructions can be found in the DATA SHEETS section below
If you need any further advice please call us on 01473 805959 or drop us an email at email@example.com
|Can be tiled on?||Floor|
|Suitable for use under||Electric Under Tile Heating|
|Thermal Conductivity||0.033 W/m.K|
|Compressive Strength||300 kPa (30 tonnes/m²)|
|Impact Sound Reduction||dLw = 21|
|XPS Core Density||36 kg/m³|
|Flexural Strength||0.30 MPa|
|Water Absorption (Capillary)||Zero|
|Max Tile Loading Weight||60 kg/m²|
|Flammability||Class E (EN 13501)|
|Product Instructions||Insulation Board Fitting Instructions|
This featured is only available on our Tile pages. As it takes into account the dimensions of the Tile you are viewing.